11/20/2023 0 Comments Apple airport utility windows 10To connect a HDD to this device it would have to connect to either an Ethernet or a USB port. Most likely, you have a combination modem & router, also known as a gateway device. Your modem must be more than a simple modem as modems only have a single Ethernet port. Yes, this probably can be better addressed if you post PC questions to the appropriate Windows forum, but let me see if I can help answer this for you. Just connect an Ethernet cable between one of the LAN (opposing arrows) ports on the Time Capsule to the Ethernet port on your PC.Īlso this is not a right thread nor a platform to ask pc questions but maybe someone can help me i connected an external hdd to my modem (instead of time capsule) but i can not find it under network on my pc i can access it with file browing app on my phone. The steps in the article are not difficult, but if you don't understand them you can cause more "harm" than good to your PC.Īnd is it possible to hard wire between time capsule and my pc? However, if you're not comfortable around computers, you may want to elicit help from a friend that does. How to access files on network devices using SMBv1 on Windows 10 - Windows Central.The steps necessary to do so are provided in the following article: I really couldnt understand even after reading whole threads under smb123 so what i need to do is enable smb1 on my windows 10 pc? In this case, the Time Capsule would be performing as a network drive. You might be able to backup your PC to it, but this would require a Windows-based backup app that supports backing up to network drives. The latter being the incremental backup app for Mac computers. The Time Capsule was designed to work in conjunction with Time Machine. now i only need time capsule to back up my files onto itself. One of those articles that can provide you with the means is available from WindowsCentral. You can re-configure your PC to use SMBv1 (also as Bob has mentioned), but it's not recommended. On the other hand, Microsoft does not want you to use this early version of SMB due to security risks and defaults a Windows 10 device to using SMBv2/SMBv3. As Bob has already mentioned, the TC only supports SMBv1.I definitely recommend that you DO NOT enable the "Share disks over WAN" option, as this would pose a serious security risk.) To do so, run the AirPort Utility for Windows > Select the TC > Manual Setup > Disks > File Sharing > Enable file sharing > Update (Note: The version of the AirPort Utility has not been updated since Windows 7 and was not designed to work with the newer 802.11ac (tower) AirPort base station. You will need to enable file sharing on the drive(s) on the TC.To be able to access the Time Capsule's (TC) internal HDD, or an external drive attached to the TC's USB port, at least two things will be required:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |